View C1812X393BGGALTU_8952125.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 1 ordering information c 2225 x 393 j c g a c tu ceramic case size (l" x w") specifcation/ series capacitance code (pf) capacitance tolerance 1 rated voltage (vdc) dielectric failure rate/ design termination finish 2 packaging/grade (c-spec) 3 0805 1206 1210 1808 1812 1825 2220 2225 x= flexible termination 2 signifcant digits + number of zeros. b = 0.10 pf c = 0.25 pf d = 0.5 pf f = 1% g = 2% j = 5% k = 10% m = 20% c = 500 v b = 630 v d = 1000 v f = 1500 v g = 2000 v z = 2500 v h = 3000 v g = c0g a = n/a c = 100% matte sn l = snpb (5% minimum) blank = bulk tu = 7" reel - unmarked auto = automotive grade 7 reel - unmarked 1 additional capacitance tolerance offerings may be available. contact kemet for details. 2 additional termination fnish options may be available. contact kemet for details. 2, 3 snpb termination fnish option is not available on automotive grade product. 3 additional reeling or packaging options may be available. contact kemet for details. overview kemets high voltage with flexible termination (hv ft-cap) surface mount mlccs in c0g dielectric address the primary failure mode of mlccsfex cracks, which are typically the result of excessive tensile and shear stresses produced during board fexure and thermal cycling. featuring several of the highest cv (capacitance/voltage) values available in the industry, these devices utilize a pliable and conductive silver epoxy between the base metal and nickel barrier layers of the termination system. the addition of this epoxy layer inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating fex cracks which can result in low ir or short circuit failures. although fexible termination technology does not eliminate the potential for mechanical damage that may propagate during extreme environmental and handling conditions, it does provide superior fex performance over standard termination systems. kemets high voltage surface mount mlccs in c0g dielectric feature a 125c maximum operating temperature and offers the most stable voltage and temperature performance of all ceramic dielectric materials. c0g (np0) dielectric capacitors exhibit no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance with reference to ambient temperature. capacitance change is limited to 30ppm/ oc from -55c to +125c. these devices exhibit low esr at high frequencies and fnd conventional use as snubbers or flters in applications such as switching power supplies and lighting ballasts. their exceptional performance at high frequencies has made high voltage mlccs the preferred dielectric choice of design engineers worldwide. in addition to their use in power supplies, these capacitors are widely used in industries related to automotive(hybrid), telecommunications, medical, military, aerospace, semiconductors and test/diagnostic equipment. automotive grade is available for applications requiring proven, reliable performance in harsh environments. whether under- the-hood or in-cabin, these capacitors are designed for mission and safety critical automotive circuits. stricter testing protocol and inspection criteria have been established for automotive grade products in recognition of potentially harsh environmental conditions. kemet automotive grade series capacitors meet the demanding automotive electronics councils aec-q200 qualifcation requirements. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commercial & automotive grade) one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 2 dimensions C millimeters (inches) ceramic surface mount w l t b s eia size code metric size code l length w width t thickness b bandwidth s separation minimum mounting technique 0805 2012 2.00 (.079) 0.20 (.008) 1.25 (.049) 0.20 (.008) see table 2 for thickness 0.50 (0.02) 0.25 (.010) 0.75 (.030) solder wave or solder refow 1206 3216 3.30 (.130) 0.40 (.016) 1.60 (.063) 0.20 (.008) 0.60 (.024) 0.25 (.010) n/a 1210 3225 3.30 (.130) 0.40 (.016) 2.50 (.098) 0.20 (.008) 0.60 (.024) 0.25 (.010) solder refow only 1808 4520 4.70 (.185) 0.50 (.020) 2.00 (.079) 0.20 (.008) 0.70 (.028) 0.35 (.014) 1812 4532 4.50 (.178) 0.40 (.016) 3.20 (.126) 0.30 (.012) 0.70 (.028) 0.35 (.014) 1825 4564 4.60 (.181) 0.40 (.016) 6.40 (.252) 0.40 (.016) 0.70 (.028) 0.35 (.014) 2220 5650 5.90 (.232) 0.75 (.030) 5.00 (.197) 0.40 (.016) 0.70 (.028) 0.35 (.014) 2225 5664 5.90 (.232) 0.75 (.030) 6.40 (.248) 0.40 (.016) 0.70 (.028) 0.35 (.014) benefts ? -55c to +125c operating temperature range ? superior fex performance (up to 5mm) ? lead (pb)-free, rohs, and reach compliant ? eia 0805, 1206, 1210, 1808, 1812, 1825, 2220 and 2225 case sizes ? dc voltage ratings of 500 v, 630 v,1 kv, 1.5 kv, 2 kv, 2.5 kv and 3 kv ? capacitance offerings ranging from 1 pf to 0.039 f ? available capacitance tolerances of 0.10 pf, 0.25 pf, 0.5 pf, 1%, 2%, 5%, 10% and 20% ? no piezoelectric noise ? extremely low esr & esl ? high thermal stability ? high ripple current capability ? preferred capacitance solution at line frequencies & into the mhz range ? no capacitance change with respect to applied rated dc voltage ? negligible capacitance change with respect to temperature from -55c to +125c ? no capacitance decay with time ? non-polar device, minimizing installation concerns ? commercial & automotive (aec-q200) grades available ? 100% pure matte tin-plated termination fnish allowing for excellent solderability ? snpb plated termination fnish option available upon request (5% min) applications typical applications include switch mode power supplies (input flters, resonators, tank circuits, snubbed circuits, output flters), high voltage coupling and dc blocking, lighting ballasts, voltage multiplier circuits, dc/dc converters and coupling capacitors in ?uk converters. markets include power supply, lcd fuorescent backlight ballasts, hid lighting, telecom equipment, industrial and medical equipment/control, lan/wan interface, analog and digital modems, and automotive. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 3 qualifcation/certifcation commercial grade products are subject to internal qualifcation. details regarding test methods and conditions are referenced in table 4, performance and reliability. automotive grade products meet or exceed the requirements outlined by the automotive electronics council. details regarding test methods and conditions are referenced in document aecCq200, stress test qualifcation for passive components. for additional information regarding the automotive electronics council and aecCq200, please visit their website at www.aecouncil.com. environmental compliance lead (pb)-free, rohs, and reach compliant without exemptions (excluding snpb termination fnish option). electrical parameters/characteristics item 3dudphwhuv&kdudfwhulvwlfv operating temperature range -55c to +125c capacitance change with reference to +25c and 0 vdc applied (tcc) 30 ppm/oc aging rate (maximum % capacitance loss/decade hour) 0% dielectric withstanding voltage (dwv) 150% of rated voltage for voltage rating of < 1000 v 120% of rated voltage for voltage rating of 1000 v (5 1 seconds and charge/discharge not exceeding 50 ma) dissipation factor (df) maximum limit @ 25oc 0.1% insulation resistance (ir) limit @ 25c 1000 megohm microfarads or 100 g (500 vdc applied for 120 5 secs @ 25c) 7rrewdlq,5olplwglylgh0)ydoxhewkhfdsdflwdqfhdqgfrpsduhwr*olplw6hohfwwkhorzhurwkhwzrolplwv &dsdflwdqfhdqg'lvvlsdwlrq)dfwru')phdvxuhgxqghuwkhroorzlqjfrqglwlrqv 0ndqg9upv9lfdsdflwdqfhs) ndqg9upv9lfdsdflwdqfhs) 1rwh:khqphdvxulqjfdsdflwdqfhlwlvlpsruwdqwwrhqvxuhwkhvhwyrowdjhohyholvkhogfrqvwdqw7kh3dqgjlohqw(kdyhdhdwxuhnqrzqdv xwrpdwlf/hyho&rqwuro/&7kh/&hdwxuhvkrxogehvzlwfkhgwr21 post environmental limits high temperature life, biased humidity, moisture resistance dielectric rated dc voltage capacitance value dissipation factor (maximum %) capacitance shift insulation resistance c0g all all 0.5 0.3% or 0.25 pf 10% of initial limit surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 4 table 1a C capacitance range/selection waterfall (0805 C 1808 case sizes) *capacitance range includes e24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82 and 91) kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). these products are protected under us patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.. capacitance cap code case size / series c0805x c1206x c1210x c1808x voltage code c b d c b d f g c b d f g c b d f g z h rated voltage (vdc) 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes see table 2 for chip thickness dimensions 1.0 - 9.1 pf* 109 - 169* b c d dg dg dg lb lb lb lb lb lb lb 10 pf 100 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 11 pf 110 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 12 pf 120 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 13 pf 130 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 15 pf 150 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 16 pf 160 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 18 pf 180 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 20 pf 200 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 22 pf 220 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 24 pf 240 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 27 pf 270 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 30 pf 300 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 33 pf 330 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 36 pf 360 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 39 pf 390 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 43 pf 430 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 47 pf 470 f g j k m dg dg dg eg eg eg eg eg fm fm fm fm fm lb lb lb lb lb lb lb 51 pf 510 f g j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb 56 pf 560 f g j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb 62 pf 620 f g j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb 68 pf 680 f g j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb 75 pf 750 f g j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb 82 pf 820 f g j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb 91 pf 910 f g j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lb lb 100 pf 101 f g j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lc lb 110 pf 111 f g j k m dg dg dg ef ef ef eg eg fm fm fm fm fm lb lb lb lb lb lc lb 120 pf 121 f g j k m dg dg dg ef ef ef eg eg fg fg fg fm fm la la la la lb lc lb 130 pf 131 f g j k m dg dg dg ef ef ef eg eg fg fg fg fm fm la la la la lb lc lc 150 pf 151 f g j k m dg dg dg ef ef ef eg eg fg fg fg fm fm la la la la lb lc lc 160 pf 161 f g j k m dg dg dg ef ef ef eg eg fg fg fg fm fm la la la la lc lc lc 180 pf 181 f g j k m dg dg dg ef ef ef eg eg fg fg fg fm fm la la la la lc lc lc 200 pf 201 f g j k m dg dg dg ef eg eg eg eg fg fg fg fm fm la la la la lc lc 220 pf 221 f g j k m dg dg dg ef eg eg eg eg fg fg fg fm fm la la la la lc lc 240 pf 241 f g j k m dg dg dg ef eg eg eg eg fg fg fg fm fm la la la lb lc lc 270 pf 271 f g j k m dg dg dg ef eg eg eg eg fg fg fg fk fk la la la lb lc lc 300 pf 301 f g j k m dg dg ef eg eg eg fg fg fg fk fk la la la lb lc lc 330 pf 331 f g j k m dg dg ef eg eg eg fg fg fg fk fk la la la lb lc lc 360 pf 361 f g j k m dg dg eg eg eg eg fg fg fg fk fs la la la lb la lc 390 pf 391 f g j k m dg dg eg eg eg eg fg fg fg fk fs la la la lb la lc 430 pf 431 f g j k m dg dg eg eg eg eg fg fm fm fs fs la lb lb lc la 470 pf 471 f g j k m dg dg eg eg eg eg fg fm fm fs fs la lb lb lc la 510 pf 511 f g j k m dg dg eg eg eg eg fg fm fm fs fs la lb lb lc lb 560 pf 561 f g j k m dg dg eg eg eg eg fg fm fm fs fs la lb lb lc lb 620 pf 621 f g j k m dg eg eg eg fg fm fm fs fs la lb lb la lc 680 pf 681 f g j k m dg eg eg eg fg fm fm fs fs lb lb lb la lc 750 pf 751 f g j k m dg eg ef eg fg fm fm fm lb lb lb la 820 pf 821 f g j k m dg eg ef eg fg fm fm fm lb lb lb la 910 pf 911 f g j k m eg ef eg fm fm fm fy lb lb lb la 1,000 pf 102 f g j k m eg ef eg fm fm fm fy lb lb lb lb 1,100 pf 112 f g j k m ef eg fm fk fk fs lc lc lc lb capacitance cap code rated voltage (vdc) 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 voltage code c b d c b d f g c b d f g c b d f g z h case size / series c0805x c1206x c1210x c1808x surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 5 table 1a C capacitance range/selection waterfall (0805 C 1808 case sizes) contd kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). these products are protected under us patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.. capacitance cap code case size / series c0805x c1206x c1210x c1808x voltage code c b d c b d f g c b d f g c b d f g z h rated voltage (vdc) 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes see table 2 for chip thickness dimensions 1,200 pf 122 f g j k m ef eg fm fk fk fs lc lc lc lc 1,300 pf 132 f g j k m ef eg fm fs fs lc lc lc lc 1,500 pf 152 f g j k m ef eg fk fs fs lc lc lc lc 1,600 pf 162 f g j k m ef eg fk fs fs lc lc lc 1,800 pf 182 f g j k m ef eg fk fs fs lc lc lc 2,000 pf 202 f g j k m eg fk fl fs lc la lb 2,200 pf 222 f g j k m eg fk fl fs lc la lb 2,400 pf 242 f g j k m eg fs fl fs lc la lb 2,700 pf 272 f g j k m eg fs fl fs lc la lc 3,000 pf 302 f g j k m fs fl la la 3,300 pf 332 f g j k m fs fm la la 3,600 pf 362 f g j k m fl fm la lb 3,900 pf 392 f g j k m fl fy la lb 4,300 pf 432 f g j k m fm fy la lc 4,700 pf 472 f g j k m fm fy la lc 5,100 pf 512 f g j k m fy fs la 5,200 pf 562 f g j k m fy fs lb 6,200pf 622 f g j k m fy lc 6,800pf 682 f g j k m fy lc 7,500pf 752 f g j k m fs 8,200pf 822 f g j k m fs capacitance cap code rated voltage (vdc) 500 630 1000 500 630 1000 1500 2000 500 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 voltage code c b d c b d f g c b d f g c b d f g z h case size / series c0805x c1206x c1210x c1808x surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 6 table 1b C capacitance range/selection waterfall (1812 C 2225 case sizes) kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). these products are protected under us patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.. cap cap code case size / series c1812x c1825x c2220x c2225x voltage code c b d f g z h c b d f g z h c b d f g z h c b d f g z h rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes see table 2 for chip thickness dimensions 10 pf 100 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 11 pf 110 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 12 pf 120 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 13 pf 130 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 15 pf 150 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 16 pf 160 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 18 pf 180 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 20 pf 200 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 22 pf 220 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 24 pf 240 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 27 pf 270 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 30 pf 300 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 33 pf 330 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 36 pf 360 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 39 pf 390 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 43 pf 430 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 47 pf 470 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 51 pf 510 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 56 pf 560 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 62 pf 620 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 68 pf 680 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 75 pf 750 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 82 pf 820 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 91 pf 910 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 100 pf 101 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 110 pf 111 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 120 pf 121 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 130 pf 131 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 150 pf 151 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 160 pf 161 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 180 pf 181 f g j k m gk gk gk gk gk gk gk jk jk jk jk jk jk jk kf kf kf kf kf kf kf 200 pf 201 f g j k m gh gh gh gh gh gk gm jk jk jk jk jk jk jk kf kf kf kf kf kf kf 220 pf 221 f g j k m gh gh gh gh gh gk gm jk jk jk jk jk jk jk kf kf kf kf kf kf kf 240 pf 241 f g j k m gh gh gh gh gh gk gm jk jk jk jk jk jk jk ke ke ke ke ke ke kf 270 pf 271 f g j k m gh gh gh gh gh gk gm jk jk jk jk jk jk jk ke ke ke ke ke ke kf 300 pf 301 f g j k m gh gh gh gh gh gk gm jk jk jk jk jk jk jk ke ke ke ke ke ke kf 330 pf 331 f g j k m gh gh gh gh gh gk go je je je je je jk jk ke ke ke ke ke ke kf 360 pf 361 f g j k m gk gk gk gk gh gk go je je je je je jk jk ke ke ke ke ke ke kf 390 pf 391 f g j k m gk gk gk gk gk gk go je je je je je jk jk ke ke ke ke ke ke kf 430 pf 431 f g j k m gk gk gk gk gk gk hj je je je je je jk je ke ke ke ke ke ke kf 470 pf 471 f g j k m gk gk gk gk gk gk hj je je je je je jk jk kf kf kf kf ke ke kf 510 pf 511 f g j k m gh gh gh gk gh gm hj jk jk jk jk jk jk jk kf kf kf kf ke ke kf 560 pf 561 f g j k m gh gh gh gk gh gm hj jk jk jk jk jk jk jl kf kf kf kf ke ke kf 620 pf 621 f g j k m gh gh gh gk gh gm hk jk jk jk jk jk jk jl kf kf kf kf ke kf kh 680 pf 681 f g j k m gh gh gh gk gh go hk je je je jk jk jk jl kf kf kf kf ke kf kh 750 pf 751 f g j k m gh gh gh gk gk je je je jk jk jk jl ke ke ke kf ke kf kh 820 pf 821 f g j k m gh gh gh gk gk je je je jk jk jk jn ke ke ke kf ke kf kj 910 pf 911 f g j k m gh gh gh gh gm je jk jk jk jk jk jn ke ke ke kf ke kf kj 1,000 pf 102 f g j k m gh gh gh gh gm je jk jk jk jk jk jn ke ke ke kf ke kf kj cap cap code rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 voltage code c b d f g z h c b d f g z h c b d f g z h c b d f g z h case size / series c1812x c1825x c2220x c2225x surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 7 table 1b C capacitance range/selection waterfall (1812 C 2225 case sizes) contd kemet reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (confguration and dimensions). these products are protected under us patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.. cap cap code case size / series c1812x c1825x c2220x c2225x voltage code c b d f g z h c b d f g z h c b d f g z h c b d f g z h rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 capacitance tolerance product availability and chip thickness codes see table 2 for chip thickness dimensions 1,100 pf 112 f g j k m gh gk gk gh go hj je jk jk jk jk jk ke ke ke kf kf kf 1,200 pf 122 f g j k m gh gk gk gh go hj je jk jk jk jk jl ke ke ke kf kf kf 1,300 pf 132 f g j k m gh gk gk gh go he hj je jk jk jk je jl ke ke ke kf kf kh 1,500 pf 152 f g j k m gk gk gk gk go he hk je jk jk jk je jl ke ke ke kf kf kh 1,600 pf 162 f g j k m gk gk gk gk hg hk je jk jk jk je jl ke ke ke kf ke kh 1,800 pf 182 f g j k m gk gk gk gm hg je jk jk jk je jn ke ke ke kf ke kh 2,000 pf 202 f g j k m gk gk gk gm he hj je jk jk je jk ke ke ke kf ke kj 2,200 pf 222 f g j k m gk gk gk go he hj je jk jk je jk ke ke ke kf kf kj 2,400 pf 242 f g j k m gk gh gk go he hj jk jk jk je jl ke ke ke ke kh 2,700 pf 272 f g j k m gk gh gk go he hk jk jk jk je jl ke ke ke ke kh 3,000 pf 302 f g j k m gk gh gk he hk jk jk jk je jl ke ke ke ke kh 3,300 pf 332 f g j k m gk gh gk hg jk jk jk jk jn ke ke ke ke kj 3,600 pf 362 f g j k m gk gh gm hg jk jk jk jk jn ke kf kf kf kj 3,900 pf 392 f g j k m gk gh gm hj jk jk jk jk jn ke kf kf kf kj 4,300 pf 432 f g j k m gh gh go hj jk jk jk jk ke kf kf kf 4,700 pf 472 f g j k m gh gh go hj jk jk jk jl ke kf kf kh 5,100 pf 512 f g j k m gh gk go he hg hk jk jk jk jl ke kf kf kh 5,600 pf 562 f g j k m gh gk go he hg hk jk jk jk jn ke kf kf kh 6,200 pf 622 f g j k m gh gk he hg jk je je jn ke kf kf kj 6,800 pf 682 f g j k m gh gm he hj jk je jk jn ke kf kf kj 7,50 0 pf 752 f g j k m gh gm he hj jk je jk kf ke kf 8,200 pf 822 f g j k m gk go he hj jk je jl kf ke kf 9,100 pf 912 f g j k m gm go he hg hk je je jl kf ke kh 10,000 pf 103 f g j k m gm go he hg hk je je jl kf ke kh 12,000 pf 123 f g j k m go he hg je jk jn ke ke kh 15,000 pf 153 f g j k m go he hj je jl ke kf kj 18,000 pf 183 f g j k m hg hk je jl ke kh 22,000 pf 223 f g j k m hj jk jn kf kj 27,000 pf 273 f g j k m hj jl jn kf kj 33,000 pf 333 f g j k m hk jn kh 39,000 pf 393 f g j k m kj cap cap code rated voltage (vdc) 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 500 630 1000 1500 2000 2500 3000 voltage code c b d f g z h c b d f g z h c b d f g z h c b d f g z h case size / series c1812x c1825x c2220x c2225x surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 8 table 2 C chip thickness/packaging quantities thickness code case size thickness range (mm) paper quantity plastic quantity 7" reel 13" reel 7" reel 13" reel dg 0805 1.25 0.15 0 0 2,500 10,000 ef 1206 1.20 0.15 0 0 2,500 10,000 eg 1206 1.60 0.15 0 0 2,000 8,000 fg 1210 1.25 0.15 0 0 2,500 10,000 fl 1210 1.40 0.15 0 0 2,000 8,000 fm 1210 1.70 0.20 0 0 2,000 8,000 fy 1210 2.00 0.20 0 0 2,000 8,000 fk 1210 2.10 0.20 0 0 2,000 8,000 fs 1210 2.50 0.30 0 0 1,000 4,000 la 1808 1.40 0.15 0 0 1,000 4,000 lb 1808 1.60 0.15 0 0 1,000 4,000 lc 1808 2.00 0.15 0 0 1,000 4,000 gh 1812 1.40 0.15 0 0 1,000 4,000 gk 1812 1.60 0.20 0 0 1,000 4,000 gm 1812 2.00 0.20 0 0 500 2,000 go 1812 2.50 0.20 0 0 500 2,000 he 1825 1.40 0.15 0 0 1,000 4,000 hg 1825 1.60 0.20 0 0 1,000 4,000 hj 1825 2.00 0.20 0 0 500 2,000 hk 1825 2.50 0.20 0 0 500 2,000 je 2220 1.40 0.15 0 0 1,000 4,000 jk 2220 1.60 0.20 0 0 1,000 4,000 jl 2220 2.00 0.20 0 0 500 2,000 jn 2220 2.50 0.20 0 0 500 2,000 ke 2225 1.40 0.15 0 0 1,000 4,000 kf 2225 1.60 0.20 0 0 1,000 4,000 kh 2225 2.00 0.20 0 0 500 2,000 kj 2225 2.50 0.20 0 0 500 2,000 thickness code case size thickness range (mm) 7" reel 13" reel 7" reel 13" reel paper quantity plastic quantity package quantity based on fnished chip thickness specifcations. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 9 table 3 C chip capacitor land pattern design recommendations per ipcC7351 eia size code metric size code density level a: maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) c y x v1 v2 c y x v1 v2 c y x v1 v2 0805 2012 1.00 1.35 1.55 4.40 2.60 0.90 1.15 1.45 3.50 2.00 0.80 0.95 1.35 2.80 1.70 1206 3216 1.60 1.65 1.90 5.90 2.90 1.50 1.45 1.80 5.00 2.30 1.40 1.25 1.70 4.30 2.00 1210 3225 1.60 1.65 2.80 5.90 3.80 1.50 1.45 2.70 5.00 3.20 1.40 1.25 2.60 4.30 2.90 1808 4520 2.25 1.85 2.30 7.40 3.30 2.15 1.65 2.20 6.50 2.70 2.05 1.45 2.10 5.80 2.40 1812 4532 2.10 1.80 3.60 7.0 0 4.60 2.00 1.60 3.50 6.10 4.00 1.90 1.40 3.40 5.40 3.70 1825 4564 2.15 1.80 6.90 7.10 7.9 0 2.05 1.60 6.80 6.20 7.30 1.95 1.40 6.70 5.50 7.0 0 2220 5650 2.85 2.10 5.50 8.80 6.50 2.75 1.90 5.40 7.9 0 5.90 2.65 1.70 5.30 7. 20 5.60 2225 5664 2.85 2.10 6.90 8.80 7.9 0 2.75 1.90 6.80 7.9 0 7.30 2.65 1.70 6.70 7. 20 7.0 0 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. kemet only recommends wave soldering of eia 0603, 0805 and 1206 case sizes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component density product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipcC7351). surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 10 soldering process recommended soldering technique: ? solder wave or solder refow for eia case sizes 0603, 0805 and 1206 ? all other eia case sizes are limited to solder refow only recommended refow soldering profle: kemets families of surface mount multilayer ceramic capacitors (smd mlccs) are compatible with wave (single or dual), convection, ir or vapor phase refow techniques. preheating of these components is recommended to avoid extreme thermal stress. kemet s recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/j-std-020 standard for moisture sensitivity testing. these devices can safely withstand a maximum of three refow passes at these conditions. profle feature termination finish snpb 100% matte sn preheat/soak ote 1: all temperatures refer to the center of the package measured on the capacitor bod surface that is facing up during assembl refow time temperature t smin 25 c to peak t l t s 25 t p t smax t l t p maximum ramp up rate = 3 c/sec maximum ramp down rate = 6 c/sec surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 11 table 4 C performance & reliability: test methods and conditions stress reference test or inspection method terminal strength jisCcC6429 appendix 1, note: force of 1.8 kg for 60 seconds. board flex jisCcC6429 appendix 2, note: standard termination system C 2.0 mm (minimum) for all except 3 mm for c0g. flexible termination system C 3.0 mm (minimum). solderability jCstdC002 magnifcation 50 x. conditions: a) method b, 4 hours @ 155c, dry heat @ 235c b) method b @ 215c category 3 c) method d, category 3 @ 260c temperature cycling jesd22 method jaC104 1,000 cycles (-55c to +125c). measurement at 24 hours +/- 2 hours after test conclusion. biased humidity milCstdC202 method 103 load humidity: 1,000 hours 85c/85% rh and 200 vdc maximum. add 100 k ohm resistor. 0hdvxuhphqwdwkrxuvkrxuvdwhuwhvwfrqfoxvlrq low volt humidity: 1,000 hours 85c/85% rh and 1.5 v. add 100 k ohm resistor. measurement at 24 hours +/- 2 hours after test conclusion. moisture resistance milCstdC202 method 106 t = 24 hours/cycle. steps 7a and 7b not required. unpowered. measurement at 24 hours +/- 2 hours after test conclusion. thermal shock milCstdC202 method 107 -55c/+125c. note: number of cycles required C 300. maximum transfer time C 20 seconds. dwell time C 15 minutes. air C air. high temperature life milCstdC202 method 108 1,000 hours at 125c (85c for x5r, z5u and y5v) with 1.2 x rated voltage applied. storage life milCstdC202 method 108 150c, 0 vdc for 1,000 hours. vibration milCstdC202 method 204 5 g's for 20 min., 12 cycles each of 3 orientations. note: use 8" x 5" pcb 0.031" thick 7 secure points on one long side and 2 secure points at corners of opposite sides. parts mounted within 2" from any secure point. test from 10 C 2,000 hz mechanical shock milCstdC202 method 213 figure 1 of method 213, condition f. resistance to solvents milCstdC202 method 215 add aqueous wash chemical, okem clean or equivalent. storage and handling ceramic chip capacitors should be stored in normal working environments. while the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. in addition, packaging materials will be degraded by high temperatureC reels may soften or warp and tape peel force may increase. kemet recommends that maximum storage temperature not exceed 40oc and maximum storage humidity not exceed 70% relative humidity. temperature fuctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulfur bearing compounds. for optimized solderability chip stock should be used promptly, preferably within 1.5 years of receipt. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 12 construction reference item material a termination system finish 100% matte sn snpb (5% min) b barrier layer ni c epoxy layer ag d base metal cu e inner electrode ni f dielectric material cazro 3 note: image is exaggerated in order to clearly identify all components of construction. capacitor marking (optional): laser marking option is not available on: ? c0g, ultra stable x8r and y5v dielectric devices ? eia 0402 case size devices ? eia 0603 case size devices with flexible termination option. ? kps commercial and automotive grade stacked devices. these capacitors are supplied unmarked only. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 13 tape & reel packaging information kemet offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with eia standard 481. this packaging system is compatible with all tape-fed automatic pick and place systems. see table 2 for details on reeling quantities for commercial chips. 8 mm, 12 mm or 16 mm carrier tape 178 mm (7.00") or 330 mm (13.00") anti-static reel embossed plastic* or punched paper carrier. embossment or punched cavity anti-static co v er t ape (.10 mm (.004") maximum thic kness) chip and kps or ientation in p oc k et (e xcept 1825 commercial, and 1825 and 2225 milita r y) *eia 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only. kemet ? bar code label sprocket holes table 5 C carrier tape conf guration C embossed plastic & punched paper (mm) eia case size tape size (w)* pitch (p 1 )* 01005 C 0402 8 2 0603 C 1210 8 4 1805 C 1808 12 4 1812 12 8 kps 1210 12 8 kps 1812 & 2220 16 12 array 0508 & 0612 8 4 5hhuwr)ljxuhvru:dqg3 1 carrier tape reference locations. 5hhuwr7deohvruwrohudqfhvshflfdwlrqv surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 14 figure 1 C embossed (plastic) carrier tape dimensions p o t f w c en t er li n e s of cav i t y a o b o u s e r d i r e c t i o n o f u n r e elin g c ov er t ap e k o b 1 i s f or t ap e f e ed er r e f e r ence onl y, i ncl u di ng dr a ft con c en t r i c a bou t b o . t 2 ? d 1 ? d o b 1 s 1 t 1 e 1 e 2 p 1 p 2 e m b os s m e nt f or c a v i t y s i z e , s e e n o t e 1 t a b l e 4 [ 1 0 p i t c h e s c um u l at i v e t ol er a n c e o n t a p e 0. 2 m m ] table 6 ? embossed (plastic) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 minimum note 1 e 1 p 0 p 2 r reference note 2 s 1 minimum note 3 t maximum t 1 maximum 8 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 1.0 (0.039) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm variable dimensions millimeters (inches) tape size pitch b 1 maximum note 4 e 2 minimum f p 1 t 2 maximum w maximum a 0 ,b 0 & k 0 8 mm single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 0.05 (0.138 0.002) 4.0 0.10 (0.157 0.004) 2.5 (0.098) 8.3 (0.327) note 5 12 mm single (4 mm) & double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 16 mm triple (12 mm) 12.1 (0.476) 14.25 (0.561) 7.5 0.05 (0.138 0.002) 12.0 0.10 (0.157 0.004) 4.6 (0.181) 16.3 (0.642) 1. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 2. the tape with or without components shall pass around r without damage (see figure 6). 3. if s 1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see eia standard 481 paragraph 4.3 section b). 4. b 1 dimension is a reference dimension for tape feeder clearance only. 5. the cavity def ned by a 0 , b 0 and k 0 shall surround the component with suff cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see figure 4). (e) for kps series product, a 0 and b 0 are measured on a plane 0.3 mm above the bottom of the pocket. (f) see addendum in eia standard 481 for standards relating to more precise taping requirements. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 15 figure 2 C punched (paper) carrier tape dimensions u s e r d i r e c t ion of u n r eelin g t o p c o v e r t ape t c e n t e r l ines o f c a v i t y p 1 ? d o p o p 2 e 1 f e 2 w g a 0 b 0 c a v i t y s i z e , s e e n ote 1, tabl e 7 b o t t o m c o v e r t a p e t 1 t 1 b o t t o m c o v e r t a p e [10 p it c hes c u mu l a t i v e t o le r a n c e o n t a p e 0 . 2 m m] table 7 ? punched (paper) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 e 1 p 0 p 2 t 1 maximum g minimum r reference note 2 mm 1.5 +0.10 -0.0 (0.059 +0.004 -0.0) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 0.10 (0.004) maximum 0.75 (0.030) 25 (0.984) variable dimensions millimeters (inches) tape size pitch e2 minimum f p 1 t maximum w maximum a 0 b 0 mm half (2 mm) 6.25 (0.246) 3.5 0.05 (0.13 0.002) 2.0 0.05 (0.079 0.002) 1.1 (0.09) .3 (0.327) note 1 mm single (4 mm) 4.0 0.10 (0.157 0.004) .3 (0.327) 1. the cavity def ned by a 0 , b 0 and t shall surround the component with suff cient clearance that: a) the component does not protrude beyond either surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. c) rotation of the component is limited to 20 maximum (see figure 3). d) lateral movement of the component is restricted to 0.5 mm maximum (see figure 4). e) see addendum in eia standard 481 for standards relating to more precise taping requirements. 2. the tape with or without components shall pass around r without damage (see figure 6). surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 16 packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia standards 556 and 624 . figure 3 C maximum component rotation a o b o t s maxi m u m c ompone n t r o t a tio n t op v i e w m a x i mum c o mponent r o t a t ion s ide v i e w t a p e m axi m u m width (mm) r otati o n ( t ) 8,12 2 0 16 ? 200 1 0 t a p e m a x i m u m widt h ( mm) r o tati o n ( s ) 8,12 20 16 ? 56 1 0 72 ? 200 5 t y p ic a l p o c k e t cente r line t y p i c a l c o m pon e n t c e n t e r l i n e figure 4 C maximum lateral movement 0 . 5 m m m a x i mum 0 . 5 m m m a x i mum 8 m m & 1 2 m m tape 1 . 0 m m m a x i mum 1 . 0 m m m a x i mum 1 6 m m t a p e figure 5 C bending radius r r b end i n g r a d i u s e mbo ssed c a r r i e r p unc hed c a rrier surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 17 figure 6 C reel dimensions a d (see n o te ) full r a d i us, see n o t e b ( s ee note) access h o le at s l o t loc a ti on (? 40 m m mi nimum) i f p r es en t, tape slot i n core for t ape start: 2.5 mm minimum wi dt h x 10.0 mm mi n imum dep th w 3 (incl u des flan g e dis to r tion at out e r e dge) w 2 ( m eas u re d a t hub ) w 1 ( m eas u re d a t hub ) c (arbor hol e di a m e ter ) note: driv e spok es o ptiona l ; if u s ed, d i mensi o ns b an d d shall a pply. n table 8 C reel dimensions metric will govern constant dimensions millimeters (inches) tape size a b minimum c d minimum mm 17 0.20 (7.00 0.00) or 330 0.20 (13.000 0.00) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm variable dimensions millimeters (inches) tape size n minimum w 1 w 2 maximum w 3 mm 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 18 figure 7 C tape leader & trailer dimensions t r a i le r 160 mm min imum c a r r i e r t ape e n d s t a r t r o und s p rocke t h o l e s e l ongated s p r o cke t h o l e s ( 32 mm tape and w i der ) t op c o ver t ape top c over t ape p unched c a r r i e r 8 mm & 12 m m o n l y e mboss ed c a r r i e r c o m p o n e n t s 1 0 0 m m m i n imum leader 4 0 0 mm m i n i m u m figure 8 C maximum camber c a r r i e r t a p e r o u n d s p r o c k e t h ol e s 1 m m max i m u m , e i t h e r d i r e c t i o n s t r ai gh t edge 2 5 0 m m e l o n g a t ed s p r oc k e t h ol e s ( 32 m m & w ide r t a pes ) bulk cassette packaging (ceramic chips only) meets dimensional requirements iecC286 and eiaj 7201 unit mm reference 1 10 0.7 31.5 0 0.2 36 0 0.2 19.0* 5 0* 10* 53 3* 6 8 0.1 8 8 0.1 12. 0 0.1 3.0 0 0.2 2.0 0.1 0 1.5 0 0.1 capacitor dimensions for bulk cassette cassette packaging C millimeters eia size code metric size code l length w width b bandwidth s separation minimum t thickness number of pieces/cassette 0402 1005 1.0 0.05 0.5 0.05 0.2 to 0.4 0.3 0.5 0.05 50,000 0603 1608 1.6 0.07 0.8 0.07 0.2 to 0.5 0.7 0.8 0.07 15,000 surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 19 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 central novi, mi tel: 248-994-1030 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe paris, france tel: 33-1-4646-1006 sasso marconi, italy tel: 39-051-939111 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe bishops stortford, united kingdom tel: 44-1279-460122 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5829-1711 shanghai, china tel: 86-21-6447-0707 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6586-1900 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 1rwh.(0(7uhvhuyhvwkhuljkwwrprglplqrughwdlovrlqwhuqdodqghwhuqdofrqvwuxfwlrqdwdqwlphlqwkhlqwhuhvwrsurgxfwlpsuryhphqw.(0(7grhvqrw dvvxphdquhvsrqvlelolwrulqulqjhphqwwkdwpljkwuhvxowurpwkhxvhr.(0(7&dsdflwruvlqsrwhqwldoflufxlwghvljqv.(0(7lvduhjlvwhuhgwudghpdunr kemet electronics corporation. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com c1070_c0g_hv_ft-cap ? 1/23/2014 20 other kemet resources tools resource location conf gure a part: capedge http://capacitoredge.kemet.com spice & fit software http://www.kemet.com/spice search our faqs: knowledgeedge http://www.kemet.com/keask electrolytic lifecalculator http://www.kemet.com:8080/elc product information resource location products http://www.kemet.com/products technical resources (including soldering techniques) http://www.kemet.com/technicalpapers rohs statement http://www.kemet.com/rohs quality documents http://www.kemet.com/qualitydocuments product request resource location sample request http://www.kemet.com/sample engineering kit request http://www.kemet.com/kits contact resource location website www.kemet.com contact us http://www.kemet.com/contact investor relations http://www.kemet.com/ir call us 1-877-mykemet twitter http://twitter.com/kemetcapacitors disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. surface mount multilayer ceramic chip capacitors (smd mlccs) high voltage with flexible termination system (hv ft-cap), c0g dielectric, 500vdc C 3000vdc (commerical & automotive grade)

▲Up To Search▲

Price & Availability of C1812X393BGGALTU

	To Download C1812X393BGGALTU Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .